Heavy-duty Electric/Hydraulic/Pneumatic Core Drill Machines
Multipurpose systems designed for hard-to-reach and standard
applications. The drill stand is ideal for floor, wall and ceiling
mounted drilling. Each machine has an optional core bit capacity of up
to 24 inches. Providing years of easy use and dependable service
- Heavy-duty column and carriage assembly
- Rust-resistant: lightweight aluminum construction
- Easy alignment for accurate hole drilling positioning
K-90 and K-201 Systems
Complete anchor bolt drilling systems
- K-90: Our lightest-weight electric system, for drilling in
limited space area (2.5-inch square column)
- K-201-HR: Heavy-duty production drilling system (3-inch
square, precision column)
- printable
full-color brochure
Standard Systems Include
- Drill stand with anchor bolt base
- 3.5 HP electric motor Manufactured by Milwaukee:
- 2- Speed Gearbox - 450/900 RPM
- 115 volts, 20 amp, 50/60 Hz
- Up to a 12-inch diameter bit capacity (see table below)
- Water swivel
- 22-inch carriage travel (K-90), or 36-inch carriage travel (K-201)
Options Available
- Power Sources – Pneumatic, Hydraulic
- Carriage travel of up to 72-inches
- Bit capacities of up to 24-inches
| 
K-90 
K-201-HR |
K-208-H System
- Heavy-duty precision roller carriage
- Heavy-duty production drill stand, 2-7/8-inch precision
drill column
- Flexible multi-purpose drilling - can be used on floors,
walls and ceilings
- Easy alignment of the drill stand for accurate hole positioning
- Hydraulic motor option pictured. Reliable Milwaukee
3.5 HP Electric Motor, 110 Volt, 20-Amp with two-speed gearbox,
Standard
- 8-inch bit diameter capacity, 24-inch drill depth - Standard
- Heavy-duty anchor bolt base
- Optional Combination anchor/vacuum base
- High performance vacuum pump - quickly grabs most surfaces
- Longer bit life with stable drilling platform
- Minimum change-over time from anchor to vacuum hold down
- Printable
full-color brochure
| 
K-208-H |
K-112-M System
- Light-weight Drill Stand
- 2-1/2-inch precision drill column
- Flexible multi-purpose drilling - can be used on floors,
walls and ceilings
- Easy alignment of the drill stand for accurate hole positioning
- Reliable Milwaukee 3.5 HP Electric Motor, 110 Volt, 20-Amp
with two-speed gearbox
- 12-inch bit diameter capacity, 21-inch drill depth
- Anchor bolt base
- Longer bit life with stable drilling platform
- Optional Combination anchor/vacuum base
- High performance vacuum pump - quickly grabs most surfaces
- Minimum change-over time from anchor to vacuum hold down
- Printable
full-color brochure
|
K-112-M |
K-102 System
Flexible, multipurpose vacuum/anchor bolt drilling system
- Milwaukee motor
- Either anchor or vacuum hold down
- High-performance vacuum pump provides over 1000 pounds of
vacuum force, quickly grabbing surfaces
- Longer bit life, stable drilling system
- Optional angle drilling, 2.5-inch square column
- Easy transport with 6-inch wheels
- printable
full-color brochure
Standard Systems Include
- Drill stand with combination vacuum/anchor bolt base
- 3.5 HP electric motor Manufactured by Milwaukee:
- 2-Speed Gearbox - 450/900 RPM
- 115 volts, 20 amp, 50/60 Hz
- Up to 12-inch diameter bit capacity (see table below)
- Water swivel
- Large (6-inch) rubber wheels
- Oil-less vacuum pump, vacuum filter, hose and quick connections
- 22-inch carriage travel
Options Available
- Power Sources – Pneumatic, Hydraulic
- Carriage travel of up to 72-inches
- Bit capacities of up to 24-inches
- Tilt column for drilling 45 degrees off vertical
|
K-102 |
Use this handy table when you order:
Model # |
Power Source |
Anchor or Combination Base |
Standard Bit Capacity |
Max Bit Capacity with Options |
| K-90 |
3.5 HP 110 Volt 20 Amp Electric |
Anchor |
8" |
12" |
| K-90-M2 |
3.5 HP 220 Volt 10 Amp Electric |
Anchor |
8" |
12" |
| K-90-H |
Hydraulic per requirement |
Anchor |
8" |
16" |
| K-90-A |
Pneumatic 90 CFM @ 80 PSI |
Anchor |
6" |
6" |
| K-102 |
3.5 HP 110 Volt 20 Amp Electric |
Combination |
12" |
12" |
| K-102-M2 |
3.5 HP 220 Volt 10 Amp Electric |
Combination |
12" |
12" |
| K-102-H |
Hydraulic per requirement |
Combination |
12" |
16" |
| K-102-A |
Pneumatic 90 CFM @ 80 PSI |
Combination |
6" |
6" |
| K-112-M |
3.5 HP 110 Volt 20 Amp Electric |
Anchor (Std) Combination (Opt) |
12" |
12" |
| K-112-M2 |
3.5 HP 220 Volt 10 Amp Electric |
Anchor (Std) Combination (Opt) |
12" |
12" |
| K-201 |
3.5 HP 110 Volt 20 Amp Electric |
Anchor |
8" |
12" |
| K-201-M2 |
3.5 HP 220 Volt 10 Amp Electric |
Anchor |
8" |
12" |
| K-201-H |
Hydraulic per requirement |
Anchor |
8" |
16" |
| K-201-A |
Pneumatic 90 CFM @ 80 PSI |
Anchor |
6" |
6" |
| K-208 |
3.5 HP 110 Volt 20 Amp Electric |
Anchor (Std) Combination (Opt) |
8" |
12" |
| K-208-M2 |
3.5 HP 220 Volt 10 Amp Electric |
Anchor (Std) Combination (Opt) |
8" |
12" |
| K-208-H |
Hydraulic per requirement |
Anchor (Std) Combination (Opt) |
8" |
16" |
| K-208-A |
Pneumatic 90 CFM @ 80 PSI |
Anchor (Std) Combination (Opt) |
6" |
6" |
Need help finding the right product?
Click here.
Please complete our simple questionnaire so we
can assist you with the products that best suit your needs.
You will be contacted via telephone, fax or email with pricing and further
information.
Thank you for your interest in KOR-IT®
Inc products.
 
Visa and MasterCard Gladly Accepted
|
Diamond
* FREE