Deepest, Most Versatile Gas Powered Saw
The new 695XL features include an easy to start engine with higher energy ignition system and durable, long-lasting components including a new muffler, carburetor and piston & cylinder. Available with 12-inch (30 cm) – 16-inch (40cm) guidebars and the entire line of MAX, ProForce and PowerGrit series diamond chains. Based on the best-selling 695 saw platform, the 695XL is the highest horsepower ICS gas saw for frequent-use by general construction, utility contractors and concrete professionals.
FEATURES AND BENEFITS
Join the many satisfied users of ICS® – Contact Us Today or purchase directly from our site.
|Engine Type||2-Stroke, Air Cooled|
|Displacement||94cc (5.7 cu-in)|
|Horsepower||4.8kW (6.4 hp) @ 9000 rpm|
|Torque||5.7 Nm (50.4 in-lbs) @ 7200 rpm|
|Engine Speed||9,300 +/- 150 rpm (max)/2,700 +/- 100 rpm (idle)|
|Chain Speed at Maximum Power||28 m/s (5500 ft /min)|
|Weight||9.5 kg (21 lbs) powerhead only|
|Dimensions||46cm (18″) L x 36cm (14″) H x 30cm (12″) W|
|Starter||Recoil, dust and water resistant|
|Ignition||Special water resistant electronic ignition|
|Fuel ratio||2% (50:1) gasoline-to-oil|
|Fuel Capacity||1 liter (0.26 gallon)|
|Water Supply Requirement||Minimum: 1.5 bar (20 psi)|
|Water Flow Requirement||Minimum: 4 lpm (1 gpm)|
|Guaranteed Sound Power Level, Lwa (1)||115 dB(A); (Kwa=1.0 dB(A))|
|Equivalent Sound Pressure at the Operator’s Ear Lwa||104.6 dB(A) (K=1.0 dB(A))|
|Vibration, ahv eq Concrete Cutting (2)||3.6 m/s2 (K=1.0 m/s2) Front Handle/3.1 m/s2 (K=1.0 m/s2) Rear Handle|
|Vibration, ahv eq Pipe Cutting (2)||5.62 m/s (K=0.2 m/s2) Front Handle/5.28 m/s2 (K=0.2 m/s2) Rear Handle|
(1) Measured in accordance with ANSI S12.51-2012/ISO3741:2010/(2) Measured in accordance with ISO5349-1:2001, ISO22867:2011 and ISO19432:2012
KOR-IT® is a certified reseller of ICS®. ICS® is a registered trademark of Blount Inc.